MNVKVIPNX_1744_EN
7 Instructions for normal
operation
Do not use the wiper if the outside
temperature is below 0°C or in case of ice.
8 Information on disposal
and recycling
The European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE) mandates
that these devices should not be disposed of in the
normal flow of municipal solid waste, but they should
be collected separately in order to optimize the
recovery stream and recycling of the materials that
they contain and to reduce the impact on human
health and the environment due to the presence of
potentially hazardous substances.
The symbol of the crossed out bin is marked
on all products to remember this.
The waste may be delivered to appropriate collection
centers, or may be delivered free of charge to the
distributor where you purchased the equipment at
the time of purchase of a new equivalent or without
obligation to a new purchase for equipment with size
smaller than 25cm .
For more information on proper disposal of these
devices, you can contact the responsible public
service.
9 Technical data
9.1 Mechanical
Wiperblade and enclosure constructed from AISI
316L stainless steel
Dimensions (ØxL): 100x169mm (3.9x6.7in) (not
comprehensive of blade)
Unit weight: 1.7kg (3.7lb)
9.2 Electrical
Connector 3+1 pins
Supply voltage/Current consumption:
• 24Vac, 290mA max, 50/60Hz
• 230Vac, 30mA max, 50/60Hz
9.3 Certifications
CE listed
IP protection degree (EN60529):
• IP67
EAC certification
Lloyd's Register Marine Type Approval (certification
only valid for the codes: VIPNX1C, VIPNX2C)
10 Technical drawings
The dimensions of the drawings are in
millimetres.
65
104
191
100
226
R170
Fig.
11
VIPNX.
65
104
191
100
270
R214
Fig.
12
VIPNXL.
Headquarters Italy
Videotec S.p.A.
Via Friuli, 6 - I-36015 Schio (VI) - Italy
Tel. +39 0445 697411 - Fax +39 0445 697414
Email: info@videotec.com
www.videotec.com
Summary of Contents for VIPNX
Page 2: ......
