38
3.44.4
Record Setup (Schedule)
When the system boots up, it is in default 24-hour regular mode. You can set
record type and time in schedule interface.
4.4.
1 Schedule Menu
In the main menu, from setting to schedule, you can go to schedule menu.
See
389H
Figure 4-12.
There are three record types: R-Regular, MD-Motion detection, A- Alarm. In
some series, system also supports C-Card)
Figure 4-12
4.4.2
Basic Operation
There are totally six periods. See
390H
Figure 4-12.
z
Channel: Please select the channel number first. You can select
“
all
”
if you want
to set for the whole channels.
z
Week day: There are eight options: ranges from Saturday to Sunday and all.
z
Redundancy: System supports redundancy backup function. You can highlight
Redundancy button to activate this function. Please note, before enable this
function, please set at least one HDD as redundant. Refer to the manual for
detailed information.
z
Prerecord: System supports prerecord function. The previous one to three
seconds video before alarm occurs can be included in recorded video.
z
Record types: There are three types: regular, motion detection (MD) and Alarm.
Please highlight icon
to select the corresponding function. After all the setups
please click save button, system goes back to the previous menu.
At the bottom of the menu, there is a color bar for your reference. Green stands
for regular recording, yellow stands for motion detection and red stands for alarm
recording.
3.4.1.14.4.1.1
Quick Setup
This function allows you to copy one channel setup to another. After setting in
channel 1, you can click paste button and turn to channel 2 and then click copy
button. You can finish setting for one channel and then click save button or you
can finish all setup and then click save button to memorize all the settings.
