50cm distance with the objects to be recorded to get the images with right direction, natural
colors, clear images and stable images. Never block the microphone sound gate to ensure the
sound recording effect.
4. Take Pictures
a.
Switch over the device to photograph mode.
b.
The BLUE light will keep on when the device is in standby status of this mode.
c.
It will take one picture and the BLUE light will flicker once every time the OPERATION KEY is
pressed shortly.
Note:
Please make sure the camera not being blocked with sufficient illumination, keep the
product body vertical and stable, with over 50cm distance with the objects to be recorded to get
the images with right direction, natural colors, clear images and stable images.
5. Audio Record
a
．
Switch over the device to audio record mode.
b
．
The GREEN light will keep on when the device is in standby status of this mode.
c
．
Press the OPERATION KEY shortly to start the audio record and the GREEN lamp will turn
from constantly ON status to even and slow flicker status.
d
．
Press OPERATION KEY shortly again to stop audio recording and save the file being
recorded, the GREEN light will turn from flicker status to constantly ON status.
Note:
To guarantee the size and safety of photography files, the system will automatically save
the file once every 60 minutes and continue to record audio. Never block the microphone sound
gate to ensure the sound recording effect.
6. PC Camera
When the unit is in this mode, you can chat with your friends on line with web camera, or hold the
net-conference with your co-workers of company; or you can apply the novel and interesting
purposes like shooting posters, etc. via the Windows programs provided by any third party. The
method of entering into computer web camera mode is shown as below.
a. Turn off the device
at first. Keep the OPERATION KEY is pressed and use the usb data
cable to connect your product to computer USB port.
b.
Release the OPERATION KEY after the device enter the PC Camera mode.
c.
Enter the PC Camera mode, Open MY COMPUTER, the icon of web cam will appear on the
screen to indicate that the web cam function of product is started up normally.
Note:
Not always that the computer can detect web cam function due to the computer
configuration or the system differences. If the product cannot enter into web cam mode, but into
the movable disk mode occasionally, please remove this unit, start up this unit and re-connect it
to the computer. If you just use the computer web cam function of this machine on your computer
for the first time, please install the web cam driver attached to the floppy disk or provided by the
distributor; to prevent this product from being damaged, please connect one end of data line to
the computer before connecting it to the computer, connect the other end of data line to the
computer. Temporarily, the computer web cam function of this unit can only support WINDOWS
operating system.
