7. Movable disk
This unit may be used as a movable disk, with the method of usage shown as below.
a. Turn off the device, c
onnect the device to the computer with USB data cable, the movable
disk icon will pop up in the computer.
b.
The directory for saving video file is *Disk\ _REC\100MEDIA.
c.
To dismantle the device, please click the movable device management icon at the right lower
corner to remove this movable memory device and after the computer has confirmed to
disconnect the hardware safety, disconnect the device and computer.
Note:
The time for computer to identify the movable disk is relative to the computer configuration,
operating system and memory capacity, please wait patiently during this course and never
operate the unit, which may affect the hardware identification. If the movable disk cannot be
recognized for a long time, please try to re-connect; if it is not recognized yet, please confirm if
your operating system, motherboard driver, USB port and connection line can work normally.
8. Charge
Connect the product to the power adaptor or computer to charge it. The RED light will flicker
slowly when the battery is being charged and will keep on when the battery is charged completely.
Note:
This unit is built in with high capacity polymer lithium battery without memory effect, which
may be charged during use. But for the first five times of use, please run out the battery power
and then charge to the full to activate the highest capacity of battery and obtain the standard
working hours; to maximize the battery power storage capacity, please continue to charge for 30
minutes to 1 hour when the indicator lamp indicates the full charging status upon charging every
time. Please make sure that the power supply complies with the standard USB power supply
specifications.
