7
2. Perform a single-beep reset to the DuraWand by turning the reset key. (Note: Do not press the
scan button.) Return the reset key to the original position. Attempt to transfer the scan data from
the DuraWand to your computer using the Videx Downloader application. If the DuraWand transfers
the data, reprogram the DuraWand with the Videx Downloader application. If your DuraWand still
does not transfer the data, go to step 3.
3. Perform a triple-beep reset to the DuraWand by holding the DuraWand scan button while turning the
reset key. The DuraWand should beep three times. Return the reset key to the original position. Test
the DuraWand with your barcodes and Videx Downloader application.