5
Alarm relay time
The alarm relay time is the time the alarm relay on the CPU will stay active for. The alarm relay activates if a key that is not
programmed or does not have access through a certain door is used consecutively five times.
To change the alarm relay time :
•
From the main screen select setup
•
Select the Door open times tab
•
Enter the time in the box provided and then press OK. (i.e. 10 seconds = 10)
Time bands
There are four time bands available on the Vprox1000 system. These are labelled A, B, C & D. Each time band has a start time, a stop
time and a day option. The day option means the time band can be set to work on all days, a single day, week days or weekends.
To change the time bands :
•
From the main screen select setup
•
Select the Time bands tab
•
Use the drop down menus to select the times and days for each of the four time bands and then press OK.
Download from Vprox1000 CPU
It is necessary to download from the CPU every time you run the program. This is to prevent accidental loss of keys due to the
possibility that the CPU information has been changed since the last upload from the PC.
The following information is downloaded :
•
Programmed keys and access levels
•
Door open times
•
Time
bands
To download from the Vprox1000 :
•
From the main screen select setup
•
Press Download from CPU.
•
A password box will appear. Enter the CPU master code (Factory default is 11111111). But this may have been changed at the
time of installation. The master code can only be changed from the CPU.
•
After entering the master code, press OK.
•
If the master code is correct, the progress of the download will be shown across the bottom of the screen.
Once the download is complete, all information from the CPU will be saved to the PC.
Upload to Vprox1000 CPU
It is necessary to upload to the CPU every time you add, edit or delete keys and when ever changes are made to door open times and
time bands. To Upload to the Vprox1000 :
•
From the main screen select setup
•
Press Upload from CPU.
•
A password box will appear. Enter the CPU master code (Factory default is 11111111). But this may have been changed at the
time of installation. The master code can only be changed from the CPU.
•
After entering the master code, press OK.
•
If the master code is correct, the progress of the upload will be shown across the bottom of the screen.
Once the upload is complete, all information from the PC will be saved to the CPU.
Add a new user
Adding a user requires the use of a reader module to read the key which is to be programmed into the system.
Before you can add
users you must first download from the CPU if you have not already done so. To add a user to the Vprox1000 :
•
From the main screen select setup
•
Select the Users tab
•
Select Add a new user.
•
A new box will appear which will allow you to either press a button to show the next available key number or use a drop down menu
to show all available key numbers from which to choose one.
•
Once a key number has been selected, press the OK button.
•
A red window will appear which will ask you to put the key on the reader.
•
Once the key has been read the window will go green.
o
At this point you will be asked to enter the users details which consist of :
•
The users name
•
The time band A, B, C, D or N for no time band
•
The unit number (Between 1 & 99 for apartment doors)
•
Path to users photo (Optional facility to add a users photo to the system) (*)note
•
Door access, (Select which door they may or may not use).
o
After entering all the detail, press the Update database button to save the entry.
At this point you can either go back and add another key or upload the information to the CPU.
(*)note: The users photo should be approx. 3cm by 5cm. And stored on the computer as either a JPG or BMP image.
