Call Recorder PRI manual © 2009-2019 Vidicode®
17
3
Configuration and operation
After you have connected the hardware it is time to configure and use the Call
Recorder. This chapter explains you how the user interface works. In the following
chapters we guide you with the configuration. You must:
Go through the recorder settings and make changes if required
Go through the network settings so the Call Recorder will fit in with your
network
Edit the Numberlists to enable special functions that you may want
(Optional) Install the Call Recorder Access software on your PC and test the
connection to the recorder
3.1
Operation basics
The Call Recorder ISDN has a common menu driven user interface. Most functions
and operations are initiated by pressing a function key followed by a sequence of
menu keys of which the function is determined by the text in the display. The use
of function keys and menu keys is as follows:
3.1.1
Function keys
The most frequently used functions of the Call Recorder PRI have been grouped in
the function keys. Throughout the entire manual symbols representing the function
keys are used to indicate the function key corresponding to the described function.
3.1.2
Menu keys
After pressing a function key the available functions are assigned to the four menu
keys. The operation of the menu keys is determined by the text in the display right
above the corresponding key. Throughout the entire manual figures representing
the display with or without the menu keys are used to show the required action
corresponding to the described feature.
