For sharper image, engage the text mode by pressing the T/P button.
3.
Showing the 3D objects:
Use the
FOCUS+
and
FOCUS-
buttons on the control panel to manually focus on
any part of the 3D object.
4. Showing the transparent material such as an overhead transparency
Press the
LAMP
button until the built-in light box is on.
OUTPUT FORMAT
The RGB output can output a signal in the SXGA or XGA format.
In order to achieve the best picture quality you must set the output format of the DV 480
to match the native resolution of your display unit.
SOFTWARE INSTALLATION
Insert the provided CD-ROM into your computer.
Open the RS232 folder and double click the DV 480_setup to run the install shield wizard.
13