Page 45
BedLift-ST327-45R_sm_07_Dec2015
Service: 1-866-821-2647
Office: 1-800-210-0141
www.storevertical.com
Conclusion:
This unit has been inspected and serviced for safe operation and is operating as intended by the manufacturer�
Comments and Parts Used (If any):______________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
Indicates item is inspected and in good condition - Indicates item requires additional
service
Service
Initials
General Visual Overview
Ensure no foreign objects projecting into the machine operation path�
Ensure all covers and guarding are in place, and secure�
Visually inspect bolt-on parts, and fasteners�
Mechanical Inspection, Motor, Gearbox, Limit Switches
Inspect motor/gearbox mounting bolts, ensure bolts are secure�
Inspect gearbox for oil leaks and check/add oil as needed�
Verify drive chain alignment, and proper tension; adjust as needed�
Check all sprocket set screws are tight, and sprockets have not moved�
Check limit switches for good condition, and proper cut-off when operating up/
down�
Load Chain, Bearings, Sprockets, and Platforms
Remove all beds, keep platforms down, and switch off machine�
Inspect load chain tension, chain connectors, and lifting bolt condition (remove
vertical cover if needed), tighten and lube as needed�
Inspect both driveshaft & sprocket alignment positions, and bearings & lockcollars�
Inspect all vertical slider brackets and bolts on all platforms�
Inspect blue plastic guides on platform corners for wear and condition�
Inspect backstops on each platform for proper alignment�
Turn power on, and check for smooth platform operation up and down
Bedlift Preventative Maintenance Checklist
BedLift-PM-Checklist-June2015�indd
Fax completed checklist to 1-204-364-3072 Attn: Service Manager or e-mail to service@vidir�com
Location City State/Province Date of Service:
Serial No� Model/Type
Service Company: Hospital Signoff :(Print)
Service Technician (Print): Title:
Service Tech Signature: Signature:
Preventative maintenance is recommended every 100 hours or 12 months.
The inspection of all
sprockets, bolts, pins, mounting hardware, chains and the overall condition of these components are
critical to ensure machine safety, and integrity of the preventative maintenance process� Initialling
each line as indicated below confi rms these items have been thoroughly inspected for defects�
