2 of 12
Viega Nonprogrammable Thermostat User Guide
UG-HC 566439 1219 Nonprogrammable Thermostat
W
For vertical mount put one screw top and one
screw bottom.
For horizontal mount put one screw left and one
screw right. The thermostat can be mounted
directly to the wall or it can be mounted to
a wall box. Use the vertical mounting screw
location to attach to a wall box.
Mounting the Subbase
Attaching the Thermostat to
the Subbase
Align the 4 tabs on the subbase with
corresponding slots on the back of the
thermostat, then push gently until the
thermostat snaps in place.
To insure a solid fit between the thermostat
and the subbase:
■
Mount subbase to a flat wall or electrical box.
■
Use screws provided.
■
Drywall anchors should be flush with the wall.
■
Wires should be pushed into the wall.
A trained, experienced technician must
install this product. Carefully read these
instructions. You could damage this
product or cause a hazardous condition if you
fail to follow these instructions.
