16 of 20
Viega Multifunctional Thermostat User Guide
UG-HC 566441 1219 Multifunctional Thermostat (EN)
Programming the Schedule
Set Time
Follow the steps below to set the day of the
week and current time:
1
Press MENU.
2
Press SET TIME.
3
Day of the week will be flashing. Use the + or
- key to select the current day of the week.
4
Press NEXT.
5
The current hour is flashing. Use the + or -
key to select the current hour. When using
12-hour time, make sure the correct a.m. or
p.m. choice is selected.
6
Press NEXT.
7
Minutes are now flashing. Use the + or - key
to select current minutes.
8
Press DONE when completed.
Day
of the
Week
Factory Default Program
Events
Time
Setpoint Temperature
(Heat)
Setpoint Temperature
(Cool)
Weekday
Wake/OCC1
6 a.m.
70°F (21°C)
75°F (24°C)
Leave/UNOCC1
8 a.m.
62°F (17°C)
83°F (28°C)
Return/OCC2
6 p.m.
70°F (21°C)
75°F (24°C)
Sleep/UNOCC2
10 p.m.
62°F (17°C)
78°F (26°C)
Saturday
Wake/OCC1
8 a.m.
70°F (21°C)
75°F (24°C)
Leave/UNOCC1
10 a.m.
62°F (17°C)
83°F (28°C)
Return/OCC2
6 p.m.
70°F (21°C)
75°F (24°C)
Sleep/UNOCC2
11 p.m.
62°F (17°C)
78°F (26°C)
Sunday
Wake/OCC1
8 a.m.
70°F (21°C)
75°F (24°C)
Leave/UNOCC1
10 a.m.
62°F (17°C)
83°F (28°C)
Return/OCC2
6 p.m.
70°F (21°C)
75°F (24°C)
Sleep/UNOCC2
11 p.m.
62°F (17°C)
78°F (26°C)
All our programmable thermostats are shipped
with an energy saving pre-program. You can
customize this default program by following the
Set Program Schedule.
Your thermostat can be programmed to have
each day of the week programmed uniquely (7
days), all the weekdays the same, a separate
program for Saturday, and a separate program
for Sunday (5+1+1), or non-programmable. There
are three time period options for each program:
■
4 Residential (WAKE, LEAVE, RETURN,
SLEEP)
■
2C Commercial (OCCUPIED, UNOCCUPIED)
■
4C Commercial (OCCUPIED 1,
UNOCCUPIED 1, OCCUPIED 2,
UNOCCUPIED 2)
This thermostat has a programmable fan feature
which allows you to run the fan continuously
during any time period.
