Weight
3000 g
Protection class
II
Permitted operating temperature
-10 °C up to 50 °C
1)
measurement uncertainty 3 dB(A)
2)
measurement uncertainty 1.5 m/s
2
NOTICE!
Wear hearing protection.
The specified oscillation emission value was measured in accordance
with a standardised test procedure and can be used to compare the
machine with another device. The specified oscillation emission value
can also be used for an initial assessment of the intermittent duty.
When the device is actually being used, the oscillation emission value
may differ from specified value, depending on the manner in which the
device is used. Depending on the actual conditions of use (intermittent
duty), it may be necessary to specify safety measures to protect the
user.
2.4.3
Operating mode
The Viega Pressgun 6B is an electro-hydraulically operated press
machine. Pressing the start button and keeping it pressed triggers
pressing. The hydraulically operated roller head moves forwards into the
press jaw and closes it with a power of 32 kN.
Power is supplied via a mains connection 220–240 V AC with 50–60 Hz.
The press machine operates by a positively controlled process. This
means:
n
During the pressing, even when the Start button is temporarily
released, the roller head of the press machine stays in the position
reached.
n
The pressing must be completed in order for the roller head to
return.
For safety reasons, the positive control is enabled only after the press
machine has reached a minimum force.
2.4.4
Control elements and indicators at the press machine
Use the Start button to trigger a pressing; see
out the pressing process’ on page 16
.
Positively controlled process
Start button
Product information
Pressgun 6B press machine with mains connection
12
