3.3
Carrying out the pressing process
CAUTION!
Risk of crushing due to improper use!
n
Do not start the press machine without a press jaw
inserted.
n
Do not reach into the area of the moving roller head or
press jaws during pressing.
n
In order to operate it safely, firmly hold the press
machine on both the handle and behind the press
machine head.
NOTICE!
Risk of property damage due to damaged
press jaws!
Using a damaged, incorrectly dimensioned, or worn press
jaw may result in an incorrect pressing.
n
Check the press jaw before use for any visible defect,
and if applicable replace the press jaw.
n
Only use press jaws that are the right dimension and
are compatible with the press connector system.
The press jaw must be able to lock properly during
pressing.
n
Ensure that there is enough space on the press point.
n
Keep the press jaw contour and the area around the
press point free from dirt and any objects that could
hinder complete pressing.
Handling
Pressgun 6B press machine with mains connection
16
