The following are monitored:
n
retaining bolt
n
Pressing time
n
Voltage / battery capacity
n
Service interval
n
Operating temperatures
Significance of the LEDs
LED
Status
Description
green
flashing
Low battery charge level – Recharge bat-
tery.
lit up
Machine is ready for operation.
red
flashing
Machine is blocked – Slide in retaining
bolt.
lit up
Outside of the temperature range
(-5 to 50°C)
yellow
flashing
30,000 strokes reached / exceeded –
Safety shutdown after further 2,000
pressings
lit up
Tool is blocked - tool is faulty or 32,000
strokes reached.
Use the On / Off button to switch the press machine on and off.
Keep the On / Off button pressed to check the LED indicators for proper
function.
The press machine switches off automatically after ten
minutes if it is not used after switch-on.
In case of interruption of the power supply during pressing, press the
button for manual release to return the roller head to its initial position.
The press jaw fixture in the front part of the cylinder head is 180° rotat-
able to allow for flexible alignment of the press jaws to the pressing
point.
On / Off button
Button for manual release
Rotatable cylinder head
Product information
Pressgun Picco press machine set
13 from 22
