Limited Warranty
34 of 36
IM-HC 561174 1120 Basic Heating Control
Hydronic Radiant Heating/Cooling and Snow Melt
Subject to the conditions and limitations in this Limited Warranty, Viega
LLC (Viega) warrants to property owners in the United States with
hydronic radiant heating/cooling and/or snow melt systems (the systems)
properly installed by Viega trained contractors that its Viega Barrier PEX
and FostaPEX
®
tubing, under normal conditions of use and properly
maintained, will be free from failure caused by manufacturing defect for a
period of thirty (30) years from date of installation.
In addition, Viega warrants that Viega PEX press metal and polymer
fittings properly installed in the systems with the above listed tubing, to
include protected PEX press metal and polymer fittings used in slab, will
be free from failure caused by manufacturing defect for a period of thirty
(30) years from date of initial installation; warrants that any accessible
metal compression or metal/polyalloy crimp fittings, manifolds and panels
sold by Viega and used in the systems will be free from failure caused
by manufacturing defect for a period of five (5) years, and warrants that
any controls, mixing stations, or electrical components sold by Viega and
used in the systems will be free from failure caused by manufacturing
defect for a period of two (2) years from date of initial installation.
Power tools and jaws used with press fittings are warranted by the
manufacturer and Viega extends no separate warranty on those tools or jaws.
Viega warrants that PEX press hand and pneumatic PEX hammer tools sold
by Viega, under normal conditions of use, shall be free from failure caused by
manufacturing defects for a period of two (2) years from date of sale.
Under this limited warranty, you only have a right to reimbursement if
the failure or leak resulted from a manufacturing defect in the products
covered by this warranty and the failure or leak occurred during the
warranty period. You do not have a remedy or right of reimbursement
under this warranty and the warranty does not apply if the failure or any
resulting damage is caused by (1) components in the systems other than
those manufactured or sold by Viega or components not recommended
for use in the systems (2) not installing, inspecting, or testing the
products covered by this warranty in accordance with Viega’s installation
instructions at the time of the installation, applicable code requirements
and accepted industry practices (for example, guidelines of the Radiant
Professionals Alliance); (3) improper design, including determining proper
heat-load of the system, or improper maintenance of the system; (4)
exposure to unauthorized solvents or chemicals, antifreeze, rust inhibitor
or other treatment fluids; freezing; or by failure to appropriately limit
recommended water temperature levels or other misuse or abuse of the
8 Limited Warranty
8.1 Limited Warranty for Viega Heating and Cooling Solutions
Summary of Contents for IM-HC 561174 1120
Page 1: ...Installation Manual Viega Basic Heating Control ...
Page 2: ......