background image

d) Under abusive conditions, liquid may be ejected from the battery;

avoid contact. lf contact accidentally occurs, flush with water. lf liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns.

e) Do not use a battery pack or tool that is damaged or modified. 

Damaged or modified batteries may exhibit unpredictable behaviour

resulting in fire, explosion or risk of injury.

f) Do not expose a battery pack or tool to fire or excessive temperature. 

Exposure to fire or temperature above 130 °C may cause explosion.

g) Follow all charging instructions and do not charge the battery pack or

tool outside the temperature range specified in the instructions. 

Charging improperly or at temperatures outside the specified range may

damage the battery and increase the risk of fire.

a) Have your power tool serviced by a qualified repair person using only

identical replacement parts.

This will ensure that the safety of the power tool is maintained.

b) Never service damaged battery packs.

Service of battery packs should only be performed by the manufacturer

or authorized service providers.

a) Use the correct tools.

Only use the tools and accessories listed in the operating instructions.

Do not use electric tools for purposes or work they are not intended for.

b) Secure the workpiece.

Use clamping devices or a vice to hold the workpiece. lt is held more

securely than it would be by hand and both your hands are free to

operate the tool.

c) Leave protective equipment in place.
d) Hand-held devices must not to be used as stationary equipment.
e) Do not hold the device in the compression area.
f) Do not hold any body parts or foreign objects between the press jaws

when activating the pressing cycle. Do not hold the jaw lever during the

pressing cycle. Danger of crushing!

There is a danger of crushing the Fingers and hands.

g) Observe the safety instructions for the cleaning and corrosion protec‐

tion agents used by you.
h) Ensure that the workpiece is not under tension.

Service

Basic safety rules

Product information

Pressgun 6 press machine with battery

9

Summary of Contents for Pressgun 6
































Reviews: