7 of 13
Product
Instructions
PI-PR 566440 0114 (Programmable Heat-Cool Thermostat)
Viega LLC, 301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 316-425-7618
Thermostat display
1 LCD
2
Glow in the dark light button
•
Push the glow in the dark button and the screen will
illuminate.
3 Fan switch
•
Set to
AUTO
to run the fan anytime heating or
cooling is running.
•
Set to
ON
to run the fan at all times.
4 System switch
•
Set to heating/cooling or off.
5 Easy change battery door
•
2- AA batteries included.
6 Temperature setpoint buttons
•
Use the
+
or
–
buttons to adjust the room
temperature.
7 User Buttons
•
Menu
•
Tech Setup
•
Set Time
•
Set Sched
Important:
The low battery indicator is displayed when the AA
battery power is low. If the user fails to replace the
battery within 21 days, the screen will only show the low
battery indicator but maintain all functionality. If the user
fails to replace the batteries after an additional 21 days
(days 22-42 since first “low battery” display) the set points
will change to 55°F (Heating) and 85°F (Cooling). If the
user adjusts these setpoints away from these it will hold
for 4 hours then return to either 55°F or 85°F. After day
42 the batteries must be replaced immediately to avoid
freezing or overheating because the thermostat will shut
the unit off until the battery is changed.
