48
Hardware Set-Up Procedures
IM-HC 599871 0321 RABS
4.3.4 Logging the Thermostat into the Control Unit
To log the thermostat in to the assigned control unit, the following
conditions must be met:
The thermostat is in battery operation.
3.3.7 “Optional: Install the Range Extender” on page 43
For log-in, the thermostat is approximately 3.3 feet away from the
control unit.
A thermostat that is not logged in will display two horizontal
dashes “– –”.
1 - “connect” button
2 - “ok” button
3 - “connect” LED
4 - “status” LED
1 - “+” button
2 - “-” button
1
2
3
4
1
2
