62
Software Set-Up Procedures
IM-HC 599871 0321 RABS
Figure 27: Example of a WLAN network overview at the end device
X
From the indicated network connections, select the desired control
unit, e.g. “rabs-1705150165”.
To establish the connection, you will need the serial number and the
password of the WLAN module. This data is to be found on a label on
your WLAN module.
X
Select the network (serial number of the WLAN module is indicated)
and enter the WLAN password.
Z
The WLAN connection to the control unit is established.
X
Open the browser.
X
Type 192.168.1.1 in the URL address line and press Enter to confirm.
Z
The Start menu of the operating software is indicated.
Figure 28: Control element: central settings
X
Click on the gearwheel icon to call up the central settings.
X
Select the entry “RABS control units”.
