86
Operation
IM-HC 599871 0321 RABS
6.1.16 Control Units / Overview Control Units / WLAN
Figure 59: Control units network overview
You can control the control unit by means of two types of wireless
connection:
Point-to-point mode
X
Click “Activate point-to-point mode” to establish a direct connection
between the end device and the control unit.
Z
In this mode, the control unit is not connected to a router.
To connect the control unit with the home network, follow
the steps described in section
Control Unit via WLAN” on page 61.
6.1.17 Central Settings / Language Menu
Figure 60: Language selection
X
Select the language for the menu settings.
