Auto power off
It allows the unit to be automatically powered off at a preset time.
Automatic drying
This function allows removing the water left in the unit tank and drying
the evaporator filter.
Note: the unit must be in "stand by" mode to perform
this function.
This function is not cyclical, to prevent unwanted
power off.
- When this function is activated, a
special icon is displayed on the
background.
- Select the
or
key until
Auto
Power Off
is displayed and press
to
confirm.
OK
- Set ON with the
or
key to activa-
te the Auto power off, or set OFF to
deactivate it and press the
key to
confirm.
OK
- Select with the
or
key the hours
or minutes and with the
or
key,
the numeric value. Press
to confirm.
OK
Important: if the unit remains off for more than four
days, activate the automatic drying to prevent bad
odours at the subsequent power on time.
Note: the drying time will depend on the amount of
water present in the tank and on the climate
conditions (about three hours).
- The ventilation is activated at maximum
speed evaporating first the tank and
then the evaporator filter.
- Set ON with the
or
key to activa-
te the drying, or set OFF to deactivate
it. Press the
key to confirm.
- The unit begins the drying process of
the water present in the tank and in the
evaporator filter.
OK
- Select the
or
key until the
Dry-
ing System
is displayed and press
to confirm.
OK
52
E
N
G
L
I
S
H
E
N
G
L
I
S
H
