Evaporator filter replacement
The evaporator filter must be replaced when the maintenance signal
turns on after a maximum of two seasons of use.
Overheating protection
The unit is automatically deactivated if the module overheats.
Generic error
The unit can detect errors or failures which cannot be fixed by the user.
WARNING
The customer is the solely responsible
party for damages to property, people or
animals left unattended inside the vehicle
with high temperature conditions
(conditions very dangerous to life).
We
remind you that the unit is an
electromechanical product and as such it
can be subjected to failure.
If the maintenance signal appears,
replace the evaporator filter.
To replace or purchase the evaporator filter contact a
local reseller.
- If the temperature of the unit exceeds
the safety value, it will automatically
enter in standby mode signalling the
problem with the related icon and an
acoustic signal.
- It will be possible to reuse the unit
when the temperature returns to
standard levels.
- When this icon is displayed, contact an
authorized service centre.
Please visit our website to find the nearest
Authorized Service Centre.
57
E
N
G
L
I
S
H
E
N
G
L
I
S
H