insert thick end of the elbow pipe
to the connection piece from the
outer side of the brine tank
the discharge hose - connection
point diameter 3/8”, outer thread
(not supplied with the device) -
can be connected in the way
identical to the one referred in
point 1.
Important notice:
-
overflow hose of the brine tank
serves only as additional
safety feature in case the filling
of the brine tank with water is
not ended in accordance to the
program.
-
no part on the overflow hose
can be placed above the
outflow level (fig. 3)
-
the overflow hose of the brine
tank must not be connected to
the outflow stub pipe of the
control valve (see point 1
above).
Fig. 3
8
Treated
water
Fastening clamps
Main water flow
3/4’’ connection
pipe
3/4’’ joint
3/4’’ nut
Copper pipe
Seal
Washings
hose
BY-PASS
VALVE
Seal and nut
Copper pipe
3/4’’ connection
pipe
3/4’’ joint
Hard
water
Outlet
Inlet
Transformer
For the
control head
Fig. 3
Ant-spill security hose
(not included in the
delivery)
Discharge drain
4 cm gap
CAUTION:
The washings hose and anti-spill
security hose must be fastened to the discharge
drain
Summary of Contents for AQUAHOME 11-N
