10
Transportation
!
Please note
Tilting at a steep angle will damage the sorption
module of the gas adsorption heating appliance.
It is
essential
that the maximum tilting angle is
not exceeded during transportation. See the fol-
lowing table.
Never
use a sack truck to transport the appli-
ance into a building.
We recommend using the transport handles with
loops or the transport aid (accessories).
!
Please note
Impact, compression and tensile loads can
cause damage to the outside panels of the
appliance.
Never
apply loads/weight to the top, front or
side panels of the appliance.
Note
The front and side panels can be removed for easier
handling (see Fig. 3, page 15).
Transportation
Tilt indicators
Action
Delivery
(tilt indicators on
the packaging)
40°
(not triggered)
We recommend commissioning the appliance within 48 h.
60° to 70° Do not commission; inform sales consultant.
Handling
(tilt indicators inside
the appliance)
40° We recommend commissioning the appliance within 48 h.
60° Commission the appliance within 48 h.
70°
(triggered)
Do not commission; inform sales consultant.
60°
60°
60°
60°
40°- 60°
70°
40°
60°
70°
40°
60°
70°
40°
60°
70°
40°
60°
70°
Fig. 1
Handling
Installation room requirements
!
Please note
Unfavourable ambient conditions can lead to
malfunctions and appliance damage.
■
The installation location must be dry and free
from the risk of frost.
■
Ensure ambient temperatures between 0 and
35 °C.
Danger
Dust, gases and vapours can be damaging to
health and trigger explosions.
Avoid dust, gases and vapours in the installation
room.
Preparing for installation
Installation preparations
5678 044 GB
Installation
Summary of Contents for D2RA
Page 113: ...113 Maintenance Checking the Vitotronic 200 H accessories cont 5678 044 GB Maintenance ...
Page 133: ...133 Parts lists Sorption module hydraulics cont 5678 044 GB Components ...
Page 136: ...136 0001 0002 0003 0004 0005 Fig 83 Parts lists Miscellaneous 5678 044 GB Components ...
Page 163: ...163 5678 044 GB ...