8. Servicing and spare parts
The specifications of the cabinet are marked on the rating plate, see
the inside cover
. Please
inform your authorised service organisation of the cabinet type, name, serial number and the
Control markings marked on the rating plate. A wiring diagram and a list of technical specifications
(FAKTA) that includes a component list are enclosed in a plastic wallet inside the machinery
compartment of the cabinet. The service periods of the cabinet are defined in a service contract.
Only authorised fitters may carry out servicing and repair of the machinery and
electrical equipment in the cabinet. The evaporator should be cleaned by authorised
service personnel.
NOTE
It is recommended to use Norpe spare parts.
8.1. Replacing fluorescent tube
1. Disconnectthelightingfixturefromthepowersupply.
2. Removethelightingfixture’sprotectivecover.
3. Unscrewthefluorescenttubefromthelightingfixture.
4. Screwinthenewfluorescenttubeandreplacetheprotectivecover.
9. Disposal of equipment
After reaching the end of its service life, the cabinet must be disposed of in compliance with local
regulations and instructions. Seek expert advice when disposing of substances that are harmful
to the environment and when utilising recyclable material.
R290 is highly flammable, this applies to cabinets using R290 propane as
refrigerant.
WARNING
12
Version03/2015
ENGLISH
PI
