26
Select the connection for the respective heating circuit:
1.
|
/
~
If no heating circuit is
being connected:
Select
"No"
.
If connecting a heat-
ing circuit to an ex-
tension kit via KM
BUS:
Select
"On the mix-
er module"
.
2.
d
To confirm.
Selecting the DHW connection
Select the connection for DHW heating:
1.
|
/
~
If no DHW heating is
being connected:
Select
"No"
.
If connecting DHW
heating to an exten-
sion kit via KM BUS:
Select
"On the mix-
er module"
.
2.
d
To confirm.
Solar connection
Can be connected via an external module.
If a Vitosolic is connected, press the following keys:
1.
|
/
~
If no solar connection
is being connected:
Select
"No"
.
If connecting a solar
connection to a
Vitosolic via KM
BUS:
Select
"On the ex-
ternal solar mod-
ule"
.
2.
d
To confirm.
Changing the heating circuit designations
Press the following keys:
1.
|
/
~
To change the letters.
2.
Ù
/
Ú
To select the next character.
3.
d
To confirm.
Checking outputs and actuators
Carrying out an actuator test
The respective actuators are displayed during the
commissioning sequence.
Confirm actuators:
1.
d
To confirm.
Commissioning, inspection, maintenance
Selecting the connection for heating circuits 1 to 3
5684984
