74
Danger
The absence of component
earthing can result in serious
injury from electrical current and
in component damage in the
event of an electrical fault.
Always
reinstate all earth con-
nections.
!
Please note
Seal the appliance so it is sound-
proof and diffusion-proof.
With line entries, ensure the dia-
phragm grommets on the l.h. side
panel are seated correctly.
Seal cable grommets with adhe-
sive tape, if necessary.
1.
Prior to closing the heat pump, check
the following:
■ Are all cables inside the terminal
area securely fixed (strain relief,
cable ties)?
■ Has the programming unit been fit-
ted and connected?
■ Have all earth conductors been
connected?
■ Have all cable entries/grommets
been correctly applied and sealed
against moisture ingress?
■ Have all hydraulic connections
been sealed airtight and been insu-
lated against heat loss and vapour
diffusion?
■ Have transport brackets been
removed?
■ Are the rear and side panels
securely fixed?
2.
Secure the top panel.
3.
Firmly close the doors at the front with
a quadrant key.
4.
Hand over product documentation for
service and quadrant key to the quali-
fied contractor.
Installation sequence
Closing the heat pump
(cont.)
5772 458 GB
