Specification
26.5
160
111
34
Power supply via plug-in power sup-
ply unit
230 V~/5 V–
Rated current
1.6 A
Power consumption
5 W
Safety category
II
IP rating
IP 30 to EN 60529, ensure
through design/installation
Mode of operation
Type 1B to EN 60730-1
Permissible ambient temperature
– During operation
0 to +50 °C
Installation in living spaces or
boiler rooms (standard ambi-
ent conditions)
– During storage and transport
–20 to +85 °C
On-site connection
Digital input:
Floating contact
Vitocom 200, type LAN2
For part no., see the current pricelist
■
Type LAN2
For remote monitoring, telecontrol and remote setting of all heating
circuits in a heating system via IP networks (LAN)
As internet data transfer establishes a permanent connection
("always online"), access to the heating system is particularly fast.
Storage combi boiler.
For system operation with
Vitotrol app
,
Vitodata 100
or
Vitodata 300
.
Functions when operating with Vitotrol app:
■ Remote control of up to 3 heating circuits in one heating system.
■ Selecting operating programs, set values and time programs.
■ Calling up of system information.
■ Displaying messages on the Vitotrol app user interface.
The Vitotrol app supports the following terminal devices:
■ Terminal devices with Apple iOS operating system version 5.0 and
6.0.
■ Terminal devices with Google Android operating system V. 4.0 and
higher.
Note
For further information, see www.vitotrol-app.info.
Functions when operating with Vitodata 100:
For all heating circuits in a heating system:
■
Remote monitoring
:
– Forwarding messages via email to terminal devices using the
email client function.
– Forwarding messages via SMS to mobile phone/smartphone or
fax (via chargeable internet service Vitodata 100 fault manage-
ment).
– Monitoring additional appliances via the inputs and output of the
Vitocom 200.
■
Telecontrol
:
Selecting operating programs, set values, time programs and heat-
ing curves.
Note
■ Telecommunication costs for data transfer are not included in the
price of the device.
■ For further information, see www.vitodata.info.
Functions when operating with Vitodata 300:
For all heating circuits in a heating system:
■
Remote monitoring
:
– Forwarding of messages by SMS to mobile phones/smartphones,
by email to terminal devices with email client function or by fax to
fax machines.
– Monitoring additional appliances via the inputs and output of the
Vitocom 200.
■
Telecontrol
:
Selecting operating programs, set values, time programs and heat-
ing curves.
■
Remote setup
:
– Configuring the Vitocom 200 parameters.
– Remote setup of Vitotronic control parameters via coding
addresses.
Note
■ In addition to the telecom charges for the actual data transfer, user
fees for the Vitodata 300 must be taken into account.
■ For further information, see www.vitodata.info.
Configuration
Type LAN2
■ With dynamic IP addressing (DHCP) the Vitocom 200 is configured
automatically. The DSL router requires no further settings.
Observe the network settings of the DSL router.
■ The inputs of the Vitocom 200 are configured at the Vitodata 100 or
Vitodata 300 user interface.
■ The Vitocom 200 is connected to the Vitotronic control unit via LON.
For the LON, the Vitocom 200 requires no configuration.
Control units
(cont.)
82
VIESMANN
Gas condensing boilers
9
5822 449 GB