12
Reset
8
EIB Prog
LON Service
A B
E
C D
F
A
ON indicator "
8
" (green)
B
Reset button (configuration is
retained)
C
Status display for the EIB system
BUS coupler (red)
D
EIB programming key
for manual integration of the Vito-
gate 200, type EIB into an existing
EIB system
E
LON service key
for manual integration of the Vito-
gate 200, type EIB into an existing
LON system
F
LON display during LON subscriber
check (yellow-orange)
Vitotronic control unit LON integration
The LON communication module
(accessory) must be plugged into the
Vitotronic control unit.
Note
The data transfer via the LON system
can take several minutes.
Viessmann system number and subscriber number
Set LON system number, LON sub-
scriber number and further functions via
code 2.
Vitotronic control unit service
instructions and the following
table.
Note
Each number can only be allocated once
within the same LON.
Only one Vitotronic control unit per
system may be programmed as the fault
manager.
Commissioning
Display and control elements
5592 880 GB
