21
Note
The subscriber number must also be
programmed into the Vitotronic control
unit selected under "Regelung" (for cod-
ing, see page 13).
Vitogate 200, type EIB is factory-set to
subscriber number "98" (delivered con-
dition).
4. Dienst
Menu for the selection of the function to
be assigned to the corresponding com-
munication object.
Menu selection
Function
Bedienung A1/M1
(Operation A1/M1)
Input of the operating parameters for heating circuit A1 or
M1 (e.g. operating modes), subject to the Vitotronic control
unit assigned under "Regelung".
Bedienung M2 (Opera-
tion M2)
Input of the operating parameters for heating circuit M2
(e.g. operating modes), subject to the Vitotronic control unit
assigned under "Regelung".
Bedienung M3 (Opera-
tion M3)
Input of the operating parameters for heating circuit M3
(e.g. operating modes), subject to the Vitotronic control unit
assigned under "Regelung".
Information
Service scans for actual values and conditions (tempera-
tures, operating status of pumps), subject to system con-
figuration.
Diagnose (Diagnosis)
Service scans for set values, actual values and conditions
(temperatures, operating status of pumps), subject to sys-
tem configuration.
5. Gruppe
Menu for the selection of a group of data-
points to be assigned to the correspond-
ing communication object.
Commissioning
Parameters in ETS
(cont.)
5592 880 GB
Service
