7
PEMASANGAN PRODUK
CATATAN :
5. Tambahkan Garam Pelunak Air
5. Tambahkan Garam Pelunak Air
Pemasangan saluran pembuangan
bukalah tutup atas pada air
purifier sebelum pipa
pembuangan terpasang
bukalah tutup atas pada air
purifier sebelum pipa
pembuangan terpasang
Controller
Drain outlet
Drain pipe coupling
Drain pipe
Fixing clamp
Bypass valve
Union
Water outlet
Water inlet
Controller
Salt suction pipe
Drain outlet
Drain pipe coupling
Drain pipe
Fixing clamp
Bypass valve
Union
Water outlet
Water inlet
Buka penutup atas perangkat
Tuang garam pelembut air ke dalam perangkat.
Tambahkan 10 kg garam pelunak air untuk pertama kalinya.
Setelah perangkat digunakan, buka penutup atas dan
periksa konsumsi garam setiap bulan.
Jika ternyata garam tidak cukup, tambahkan.
Jangan gunakan garam yang dapat dimakan (garam sayur),
karena yodium yang terkandung dalam garam tersebut dapat
sangat merusak resin penukar ion dan membuat resin gagal.
Jangan gunakan garam kelas industri.
Perhatikan untuk memeriksa jumlah garam yang disimpan
di tangki garam dan tambahkan garam baru tepat waktu saat
ketinggian permukaan garam kurang dari seperlima dari tinggi
tangki garam. Pada tangki garam, dibentuk ruang di bawah
lapisan garam untuk membentuk batang garam, sehingga
garam tidak dapat larut dalam air membentuk larutan garam
selama regenerasi, sehingga mempengaruhi regenerasi resin.
Oleh karena itu, perangkat tidak akan menghasilkan air lunak
yang berkualitas. Harap sering-sering memeriksa apakah ada
batang garam di dasar tangki garam; jika ya, hancurkan dan
patahkan.
ID
Pour water
softening
salt into
the device
22
SET
PEOPLE
4
OK
MODE
Control operation
MODE keys
■ P
ress and hold the key for 3 seconds to unlock and enter
into the standby state.
■
After unlocking, press and hold the key for 3 seconds to
enter into the user menu.
■ P
ress the key to select items such as clock, year, month,
day, regeneration time cycle, regeneration flow cycle,
regeneration start time and restore default settings.
■ H
ighlight the selected value.
■ E
dit parameter by pressing the Up key
▲
or Down key
▼
,
then press the OK key to confirm the storage and return
to standby state.
■ I
f edition is not required, press the key to enter into the
next item until it returns to the standby state.
OK key
Confirm and save the selected item value.
■
After unlocking, press the key once to schedule a manually
delayed regeneration program and press it again to close
the manually delayed regeneration program.
■ P
ress and hold the key for 5 seconds to immediately
execute the automatic regeneration program once.
■ P
ress the key in the user menu interface to exit.
■ I
n other advanced setting menus, press the key to save
the current option setting and enter into the next parameter
setting.
■ I
n the main interface play information page: for the
cumulative regeneration times, cumulative processed
water volume, peak flow and other information, press
and hold the key to reset the parameters.
U p k e y , D o wn k e y
In the standby interface, press these two keys to view
the information about system usage.
■ I
n a certain menu option, press these two keys to adjust
the value or option.
■ P
ress these two keys at the same time to enter into the
advanced menu.
Enter into the standby interface if there is no operation
within 1 minute.
Lock the system if there is no operation in the standby
interface within 1 minute.
Instruction to contro ller
operation keys
Current date and time
Set number of persons who use water
Use the 4 mode.
Sep./27/2020
17:18
SALT
SETTING
STANDARD
Use the standard mode.
WATER
SOURCE
MUNICIPAL
Use municipal water supply mode.
REGEN
.
TIME
02:00
It is recommended to set the time
period when water is not used.
The system defaults to 02:00.
PROGRAMMING
COMPLETE
LOAD DEFAULT
NO
S ET H A R D N ES S
3 4 0 m g / L
Enter the actual raw water hardness of
the local water source, in mg/l.
Y E A R
2 0 2 0
DAY
27
MONTH
Sep.
TIME OF DAY
01:07
User settings S3-Series
After unlocking, press and hold the key for 3 seconds to enter
into the user menu. Press the key to select items such as clock,
year, month, day, regeneration time cycle, regeneration flow
cycle, regeneration start time and restore default settings.
Highlight the selected value. Edit parameter by pressing the
Up key
▲
or Down key
▼
, then press the OK key to confirm
the storage and return to standby state. If edition is not required,
press the key to enter into the next item until it returns to the
standby state.
Summary of Contents for Vitopure S2-2T
Page 26: ...26 V I T O P U R E NOTE ...
Page 27: ...27 V I T O P U R E NOTE ...
