2
Installation information
■ Align the
coated
side of the absorber
with the sun.
■ Ensure that no part of the thermal
insulation becomes trapped.
■ The surface of the condenser must
be clean.
■ Position the condenser centrally in
the condenser holder inside the heat
exchanger.
For roofs deviating from due south,
adjust the angle of inclination of the
absorber (see scale in illustration on
page 3).
25°
!
Please note
Never install or align (rotate) the
vacuum tubes whilst they are
locked into position.
This will cause damage to the
vacuum tubes.
Fitting the vacuum tubes
(cont.)
5792 651 GB
