17
3.
at the end of the time phase.
4.
OK to confirm.
Deleting a time phase:
1.
to mark the start of the time phase that is to be
deleted.
2.
until the end of the time phase.
3.
at the end of the time phase.
4.
OK to confirm.
Entering the operator code
To access the expert settings, enter the operator code.
Press the following keys:
1.
for
"Op. code"
.
2.
OK
to confirm.
3.
/
for "0262".
Confirm every digit with
OK
.
To prevent unauthorised access, set the operator code
to "0000" after commissioning.
Setting the language
Can only be set for individual control units and master
control units
Press the following keys:
1.
for
"Default settings"
.
2.
OK
to confirm.
3.
OK
to confirm for
"Lang."
.
4.
/
for the required language.
5.
OK
to confirm.
Setting the summer/wintertime changeover
Can only be set for individual control units and master
control units
Press the following keys:
1.
for
"Default settings"
.
2.
OK
to confirm.
3.
OK
to confirm for
"
x
Summer/winter"
.
4.
/
for Yes (automatic changeover enabled) or No
(no automatic changeover)
5.
OK
to confirm.
Setting the time and date
Can only be set for individual control units and master
control units
Press the following keys:
1.
for
"Default settings"
.
2.
OK to confirm.
3.
for
"Date"
.
4.
OK to confirm.
5.
for setting day.month.year.
Commissioning
Navigating through the menu
(cont.)
5517 095 GB
Commissioning
Summary of Contents for VITOTRANS 353
Page 50: ...50 5517 095 GB ...
Page 51: ...51 5517 095 GB ...
