9
The Vitotrol 300 RF remote control can
also be taken out of its table-top dock or
wall mounting bracket and used to make
adjustments.
"Mobile test location"
appears on the
display.
The room temperature sensor built into
the Vitotrol 300 RF captures the temper-
ature.
While you are holding the
Vitotrol 300 RF in your hands, for exam-
ple, the displayed room temperature
begins to rise (actual room temperature,
see page 12).
However, the Vitotronic control unit oper-
ates on the basis of the room tempera-
ture value that it received before the
Vitotrol 300 RF was removed from its
holder.
If the Vitotrol 300 RF has been out of its
holder for 5 min and has not been used,
an acoustic signal will sound every 30 s.
However, if the remote control is used
during this time, the time counter is
reset.
Once you have
finished using
the
Vitotrol 300 RF, return it to its table-top
dock or wall mounting bracket.
This ensures that the batteries are
always charged.
The Vitotrol 300 RF enables the follow-
ing adjustments to be made from the liv-
ing space:
■ Standard room temperature
■ Reduced room temperature
■ DHW temperature
■ Operating and holiday program
■ Time phases for central heating
■ Time phases for DHW heating
■ Time phases for the DHW circulation
pump (if installed)
■ Date and time
All other settings are transferred from the
Vitotrol 300 RF to the Vitotronic control
unit and vice-versa. The
most recent
adjustments always apply to the relevant
heating circuit.
Controls and symbols
Wednesday 25.05.2011 13:42
Heating circuit 1
Menu
14°
20.5°
The Vitotrol 300 RF remote control is fit-
ted with a touchscreen. To make adjust-
ments and scans, press the on-screen
buttons.
The symbols are not permanently dis-
played, but appear subject to the system
version and the operating state.
Note
Radio transmission can take some time,
so there may be a delay in the display of
symbols.
About the controls
Operating information
5592 245 GB
