12
"Help" menu
Displays explanations about operation in the form of a
short guide.
Call up the short guide as follows:
■
If the screensaver is active (see page 14):
Press .
■
From anywhere in the menu:
Press repeatedly until the standard menu is
shown (see page 12).
Press .
Symbols
These symbols are not always displayed, but appear
subject to the system version and the operating state.
Indicators:
Frost protection enabled
Central heating to standard room temperature
Central heating with reduced room temperature
Party mode enabled
Economy mode enabled
In conjunction with a solar thermal system:
Solar circuit pump is running
Heating circuits:
Heating circuit ...
Heating programs:
, , :
For an explanation of the symbols, see page 16.
Messages:
Fault
Service
Standard menu
The following settings for the preferred heating circuit
(
D
) can be called up and adjusted in the standard
menu:
■
Set room temperature
■
Operating program
Call up the standard menu as follows:
■
If the screensaver is active (see page 14):
Press
OK
.
■
If you are in the extended menu (see page 13):
Press repeatedly until the standard menu
appears.
B
C
A
48 °C
Boiler temperature
14 °C
21 °C
HC1
D
Fig. 5
A
Operating program for the preferred heating circuit
(
D
)
B
Current outside temperature
C
Set room temperature for the preferred heating cir-
cuit (
D
)
D
Preferred heating circuit (see page 31)
Not displayed if only
one
heating circuit is instal-
led.
Operation
Programming unit
(cont.)
5592667
