14
Wall mounting
A
390
142.5
3.
142.5
4.
1.
2.
3x
Fig. 8
A
Rubber washers as anti-vibration measure
Floorstanding installation
1.
In order to safeguard that the condensate can drain
off freely, site the Vitovent on a mounting plinth
(accessories). Vibrations are isolated by means of
adjustable anti-vibration feet.
2.
Level the Vitovent horizontally.
Connecting the condensate drain
Heat recovery generates condensate in the counter-
current heat exchanger.
!
Please note
Condensate must be able to drain freely.
Route all condensate pipes with a steady fall.
Never use sagging hoses.
Installing the Vitovent
5793 589 GB
