38
3-way diverter damper connection for geothermal
heat exchanger (on site)
G
+10 V: X15.9
E
GND: X15.5
An on-site coupling relay is required for 230 V control
of the diverter damper.
Fitting and connecting the remote control
Installation location:
■
Centrally on an interior wall, approx. 1.5 m above
floor level, e.g. in the living room
■
Not near windows or doors
■
Not above radiators
■
Not near heat sources (direct sunlight, fireplace, TV
set, etc.)
Connecting cable:
■
2-core, interchangeable cores
■
Min. cross-section 0.5 mm
2
■
Max. cable length 50 m
1.
Fig. 37
2.
3.
Fig. 38
Electrical connections
(cont.)
5793 589 GB
