background image

5

1.

Information

Disposal of packaging ............................................................................

6

Symbols .................................................................................................

6

Intended use ..........................................................................................

6

Product information ................................................................................

7

Functions ............................................................................................

7

Spare parts lists .....................................................................................

7

2.

Preparing for installation

................................................................................................................

8

3.

Installation sequence

Process overview ...................................................................................

9

Installing the gateway and power supply unit ........................................

9

Arrangement on the top-hat rail .......................................................... 10

Installing the gateway ......................................................................... 11

Installing the power supply unit .......................................................... 12

Connections and operating elements .................................................... 13

WAGO BACnet/IP gateway ................................................................ 13

LED indicators .................................................................................... 14

Power supply unit ............................................................................... 14

Connecting and releasing cores ............................................................ 15

Gateway ............................................................................................. 15

Power supply unit ............................................................................... 15

Establishing the CAN bus connection .................................................... 16
Connecting the plug-in attachment ........................................................ 18

WAGO BACnet/IP gateway ................................................................ 18

Establishing the connection to the BACnet/IP gateway ......................... 19
Connecting the gateway to the power supply unit ................................. 20

Connecting cores in the power supply unit ......................................... 20

Power supply ......................................................................................... 21

General information ............................................................................ 21

Power supply via the mains isolator ................................................... 22

Power supply independent of the mains isolator ................................ 23

4.

Commissioning and
adjustment

Commissioning the gateway .................................................................. 24

5.

Specification

................................................................................................................ 28

6.

Certificates

Declaration of conformity ....................................................................... 30

7.

Appendix

Final decommissioning and disposal ..................................................... 31

8.

Keyword index

................................................................................................................ 32

Index

Index

6175460

Summary of Contents for WAGO 750-8212/000-100





































Reviews: