[
EN ● 6
]
Version: 2g
18.12.2019
1.
Users need to pair the remote and receiver at first time. Long press the receiver ON/OFF 3 se
-
conds until light flashing and then press button °C/°F and MODE of the remote at the same time
to pair the remote and receiver until long beep sound.
NOTE:
- Pairing should be finished within 3 minutes, or else you need to re-press the receiver button
again, to start.
- Please re-press on/off of the receiver if you want to pair with another remote.
- Please power off those receivers that you don’t want to pair together.
2. Press ON/OFF button to turn on/off the heater
For each hour, a temperature mode (power saving mode or comfort mode) can be set.
If users power off/on the remote manually, the receiver and heater will be still powered on/off
automatically later and work as per week timer and temperature set if under TIMER ON mode.
NOTE: ON/OFF switch of the receiver can not be used for turning on/off the heater properly if re
-
mote control works well within proper distance, no matter if the LCD screen is powering on or off.
3.
Press °F/°C button to convert the temperature display measurement unit.
4.
Long press LOCK 3 seconds to lock/unlock the buttons.
5. Press UP and DOWN to set target temperature.
Even week timer is in working state, users can also press UP and DOWN to Set a temporary
temperature which will be remembered until the time set for TIMER ON.
The set temperature will convert to week target temperature at the time when TIMER ON start to
work.
The 1-5, 6, 7 week icons displayed on the left of set temperature will disappear.
6. Long press MODE 3 seconds to set SMART and TIMER ON/OFF mode.
Both SMART and TIMER symbol display “OFF” status at remote control first turning on .
TIMER ON/OFF
means the programmed timer and temperature settings of 1-5 (Monday-Friday),
6 (Saturday) and 7 (Sunday) will work or not. The 1-5, 6, 7 week icons will be displayed on the
left of the set temperature and under TIMER ON.
SMART ON
means the remote control will itself 3 hours earlier calculate the temperature differen
-
ce between room and set , and decide how earlier before timing to turn on the heating
device, so that environment temperature could reach set temperature on time. The calculating
logic is 6 minutes earlier per 1°C.
SMART MODE
has also a kind of simple window open monitoring function which means heater
will be turned off/on automatically if room temperature falls down/rises up continuously over
1.5°C within 3 minutes.
The 1-5, 6, 7 week icons displayed on the left of set temperature will disappear once users
press UP or DOWN to set temperature manually, and display again when powered on by TIMER
setting.
7.
SET means setting week timer and temperature, smart adaptive start time and temperature, FAV
temperature.
Important: SET finished does not mean it will start to work, unless the model TIMER has been
ON!
8.
Long press SET 3 seconds to start timer\smart\FAV setting.
- week timer and temperature setting. 1-5 (Monday-Friday) first, set time for turning on and
off the heating device, press UP to set the hour and DOWN to set the minutes (15 minutes per
press) and press SET to finish for next setting, then set the temperature of this period with UP
and DOWN button. Same operations for 6 (Saturday) and 7 (Sunday) setting.
- after above settings, there is timer and temperature set for SMART mode.
NOTE: Smart mode is independent of Timer function.
- If following above is finished than it come to the FAV (favorite temperature) setting. There is
only the “temperature” icon flash to set FAV Temperature after smart start facility temperature set
finished.
