37
EN
KEN002VAC
v1• 11.11.2020
INSTRUCTION OF QUICK CONNECTOR
1. Please carefully spread the pipeline. Be sure to execute this step with great care.
2. Please remove the protective caps of connectors A1 and A2 of indoor unit.
3. Please ensure that every bolt is in a good condition and without dirty particles such as dust and sand or any other
suspended solid and dirt.
4. Please use your hands to screw down the Quick Pipe Connectors 1 and 2 to the connectors A1 and A2. After
that, use two wrenches (one for fixing the connectors and the other one for screwing down the quick pipe connec-
tors) to screw the nuts till the non-return circles. Repeat this step for all the connecting pieces.
Use quick connector to connect the indoor and outdoor units of an air conditioner in a simple way. Being quick
and safe means enjoying a complete right of warranty claim. A quick connector is a closed system with an
automatic safety valve. The break-over of refrigerant cannot be done until the connector between the indoor
and outdoor units is sealed in order to avoid the danger of refrigerant leakage.
The safety avoids the refrigerant operations such as pipe exhaust and system filling.
The purchase of this product is always integrated with the maintaining and operation done by a qualified
operator..
PLEASE READ AND FOLLOW THE FOLLOWING PROVISIONS:
- 1: A1 refers to the liquid pipe, 1/4’’ 6.35 mm
- 2: A2 refers to the suction pipe, 1/2’’ 12.7 mm
or 3/8’’ 9.52mm .