10
General setup
Initial settings
This system is designed with a user-friendly setup menu. Use
the section to take you through the system and disc setup
options and recommendations.
Using the SETUP menu
Press
SETUP
on your remote control unit to display the setup
menu. Use the / / / buttons to select your preferred
option, and press
ENTER
to confirm a highlighted selection. To
exit setup menu, press
SETUP
.
Setting the TV display
Setting the TV display
Setting the TV display
Setting the TV display
Setting the TV display
You can select the aspect ratio of the TV to be connected.
The default setting is
NORMAL/PS.
•
NORMAL/PS
If you have a conventional TV set and your DVD is not
formatted for widescreen viewing, use this setting. A wide
picture is displayed on the whole TV screen with a portion
automatically cut off.
•
NORMAL/LB
If you have a conventional TV set and your DVD is format-
ted for widescreen viewing, use this setting. Wide bands
will be displayed on the upper and lower portions of the TV
screen.
•
WIDE
If you have a widescreen TV set, use this setting (you
must also set your widescreen TV to
“
full size
”
)
Selecting the TV SYSTEM
Selecting the TV SYSTEM
Selecting the TV SYSTEM
Selecting the TV SYSTEM
Selecting the TV SYSTEM
This function allows you to select the color system matching
the connected TV set.
The initial setting is
PAL.
Option:PAL, NTSC, MULT.
Downmix
Downmix
Downmix
Downmix
Downmix
Select the DOWNMIX for LT/RT,STEREO.
The default setting is
STEREO
.
•
LT/RT(LEFT TOTAL/ RIGHT TOTAL)
A two-channel delivery format for Dolby surround four chan-
nels ( audio left,center, right and surround ) are matrix
encoded two channels. The terms refer to a Dolby sur-
round compatible downmix.
•
STEREO
All sound is reproduced and played through the front left
and
right speakers. This enables standard stereo reproduction.
Note
•
LT: Only matrix encoded audio left, center, and surround
RT: Only matrix encoded audio right center and surround.
Basic Setup
Basic Setup
Basic Setup
Basic Setup
Basic Setup
Setting the speakers
Setting the video output
Setting the video output
Setting the video output
Setting the video output
Setting the video output
Selects the video output terminals.
The default setting is
S-VIDEO
.
Option: S-VIDEO,SCART.
•
S-VIDEO
Select this setting when VIDEO OUT or S-VIDEO is con-
nected.
•
SCART
Select this setting when SCART is connected.
Selecting the on screen display (OSD) lan-
Selecting the on screen display (OSD) lan-
Selecting the on screen display (OSD) lan-
Selecting the on screen display (OSD) lan-
Selecting the on screen display (OSD) lan-
guage
guage
guage
guage
guage
This function allows you to select the desired language.
The default setting is
ENGLISH
.
Option: ENGLISH, FRENCH, GERMAN, ITANISH, SPANISH, DUTCH.
-- GENERAL PAGE --
TV DISPLAY
TVSYSTEM
OSD LANG
VIDEO OUTPUT
MAIN PAGE
NORMAL/PS
NORMAL/LB
WIDE
SET TV DISPLAY MODE
General setup
-- SPEAKER SETUP PAGE --
DOWNMIX
MAIN PAGE
LT/RT
SET DOWNMIX MODE
STEREO
