25
under PBC mode, you should press the PBC button to stop playing. If a DVD disc is playing,
PRESTOP OSD is displayed when you press the STOP/RETURN button once showing time
information and the play mark (
) will be blinking on the Fluorescent Display instead of the STOP
message. This state is called PRESTOP. If you press PLAY/PAUSE in a PRESTOP state, the
picture is played from the point you previously stopped.
DVD PRESTOP VCD STOP
2 Removing DISC from the disc tray
Press OPEN/CLOSE button to open disc tray. When the disc tray is opened, take out the disc
from the tray.
See 5.1 for more information.
3 Press POWER button
When POWER is pressed, disc tray is closed and POWER is off while STAND BY LED turns on.
z
If power is OFF, after pressing POWER button during PLAY or PRESTOP state, play is resumed from
the point where it was stopped. It is called RESUME function. If you switch OFF by disconnecting AC
cord, the machine will start playing from the first track or chapter.
5.7 SEARCH
Use this function to play the DISC contents in fast forward or fast reverse. During searching, audio
will be muted.
