Turn the speaker power ON/OFF
1. Slide the Power ON/OFF selector on the bottom of the unit to ON position (where the
orange line mark on the selector can not been seen),a voice prompt
“Power on”
and a
beep sound is heard in 2-3 seconds. Meanwhile, the
Operating mode indicator
will flash
in blue.
2. To turn the unit off, slide the Power ON/OFF switch to OFF position (where the orange
round mark on the selector can been seen).
Operating the speaker in Bluetooth mode
Bluetooth involves a technology for wireless radio connection of devices over a short
distance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz
in the ISM band (Industrial, Scientific and Medical). Interference can be caused, for
example by WLAN-networks, DAB radios, cordless phones, or microwave ovens which
work on the same frequency band.
•
This speaker offers you the possibility to use a Bluetooth enabled device. The functional
radius is limited to approx.10 metres depending on the surroundings and the unit used.
•
If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and
has a music-player function, then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals
are wirelessly transferred between the playing device (source) and the receiving device.
•
Due to the different device manufacturers, models, and software versions, a full
functionality cannot be guaranteed.
Logging on devices (Pairing)
Before using your speaker with a compatible device, such as a mobile phone, for the first
time, you must pair and connect it to the device.
1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone). For
this, refer to the operation manual of your player.
2. Turn on the speaker, the operating indicator flashes in Blue to show that the pairing
mode is activated.
Pair the Speaker manually
1. Activate Bluetooth on the compatible device, and set it to search for compatible devices.
2. Select the speaker name:
“Vieta VH-BS15”
from the list of found devices.
Tips: Only one playback unit can be connected to the speaker. If the speaker is already
connected to another playback unit, the speaker will not appear in the BT selection list.
3. If your device asks for a passkey (depending on the device manufacturers, model, and
software version), then enter digits “0000”(four zeros) and press OK.
If pairing has been carried out successfully, a voice prompt “Pairing completed” and a
beep sound is heard, meanwhile, the Blue color indicator stops flashing.
If the speaker has ever been paired with a Bluetooth device before. You need to follow
the pairing instructions below to link the speaker with your Bluetooth device.
11
12
