1. After turning on the speaker, the speaker will search for the last paired device. The
operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device, a
beep sound is heard and operating mode indicator will keep in blue and stop flashing.
2. After successfully pairing (linking), you can begin playing music from your Bluetooth
device wirelessly to the speaker.
3. Press the + / - button on the speaker to adjust to the desired volume level.
Using The Speaker as a Handfree Bluetooth Speakerphone
1. Link your cell phone to the speaker via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, tap button on the speaker to
switch the incoming call from cell phone to the speaker. A short beep sound will be heard
confirming the call was answered. Complete your call using the built-in microphone and
speaker.
3. Adjust the volume control of your cell phone to obtain the desired sound level.
4. To end the call, just tap the button again, a short beep sound will be heard and the
call will end. If you were playing music from your cell phone to the speaker before
answering the call, the music will automatically resume playing when you hang up.
5. To ignore an incoming call, simply press and hold the button on the speaker for
about 2 seconds, a beep sound will be heard and the call will be ignored.
Operating the speaker in aux-in mode
If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect
this unit via bluetooth directly, you can still play it on the speaker via an audio connecting
cable.
1. Plug one end of the 3.5mm audio cable (included) into the headphone or line out jack on
your player, plug the other end of cable into the unit AUX-IN jack of the speaker.
2. Turn on the external audio source and play your device.
3. Slide the Power ON/OFF switch to ON position to turn on the unit, the operating mode
indicator will light up in Red.
4. The volume level can now be controlled through the main unit. Operate all other
functions on the external device as usual.
Notes:
1) If you're connected to the Line out Jack of your external device, then you only need to
adjust the volume control of this speaker. If you're connected to the Headphone Jack of
your external device, then you may need to adjust both the volume control of your external
device and the volume control of this unit to find the most desirable volume setting.
2) Slide the Power ON/OFF selector to OFF position to turn off the unit when you finish
listening.
Don't forget to switch off the power of your external device as well.
13
14
