●
Battery Function: Open the battery door on the back of unit without connecting AC
power supply and
load four No.5 batteries into the battery cartridge according to the
positive
and negative polarities.
Then time will be displayed on the screen, press
key to access
power-on status to enjoy the music. In case of power supply with DC 5V transformer, disconnect
the battery and use the external DC supply.
●
Clock Settings: In Standby status,
press MEM/SET key for a longer time to enter into
Clock
Settings
status, then the clock will be displayed, numbers on LED light will flash. Press
VOL- key again to adjust the hour, press VOL+ key to adjust the minute and press MEM/SET
key to confirm the settings and exit from the clock status.
Clock 1 Setting: Press
T+/AL1 key for a longer time for setting in Standby status, then the
clock will be displayed, numbers on LED light will flash. Press VOL- key again to adjust the
hour, press VOL+ key to adjust the minute and press T+/AL1 key to confirm the settings and
exit from the clock status.
Clock 2 Setting: Press
T+/AL2 key for a longer time for setting in Standby status, then the
clock will be displayed, numbers on LED light will flash. Press VOL- key again to adjust the
hour, press VOL+ key to adjust the minute and press T+/AL2 key to confirm the settings and
exit from the clock status.
Alarm clock mode setting: Enter into Alarm Clock Settings and press SLEEP/AL MODEL
key to
enter into alarm clock setting mode (ring tone bu/f radio)
●
Snooze function: After the alarm clock has rung, press
SNOOZE key to start up snooze
function.
The alarm ring will pause and will ring alarm ten minutes later. You can then press
key to stop the alarm bell and not resume it.
●
Sleep Function:
In the play/ pause status of arbitrary function, press “
SLEEP/AL MODEL
key short on the unit to set the sleep time as 90/M-80 /M-70/ M-60/M-50 /M-40/ M-30/
M-20/ M- 10/M –OFF as you desire.
●
Troubleshooting Guidance and FAQs:
Before repairing this unit, please find out the possible causes as per the following FAQs to
make simple troubleshooting if necessary, they may help you to solve the problems and resume
the normal operations. If not, please get your product to the professional service men for
maintenance.
1. Q: No power
A: Please make sure the source jacket is connected well.
.
2. Q: No voice in AUX play mode
A: Please confirm if the unit is in PLAY status.
