Niagara Pro II User Guide
ViewCast
91
6.
Enter the frames per second in the
Frame Rate
field.
7.
Enter the kilobits per second in the
Bitrate
field.
8.
In the
Format
field, indicate the color space format.
9.
Drag the sliders to adjust the
Brightness
,
Contrast
,
Hue
, and
Saturation
(Figure 109).
Figure 109. Video Filter Settings
Note: Click
Restore
to the right of the filter to reset the settings to the default.
10.
Click the
De-Interlace
setting you want to apply (Figure 110). Options include:
None
– Performs no de-interlacing of any kind.
Auto
– Applies inverse telecine de-interlacing to all telecine video.
– Applies motion adaptive de-interlacing to all video that is not telecine.
– Switches dynamically between the two modes as the content changes.
– Available for NTSC video only.
Inverse Telecine
– Drops the redundant fields and reassembles the video in a 24 fps progressive format.
– Applies inverse telecine de-interlacing to all telecine video.
– Performs no de-interlacing of video that is not telecine.
– Available for NTSC video only.
Motion Adaptive
– Is an algorithm for de-interlacing pure video (non-telecine) content.
– Applies motion adaptive interlacing to all video. It detects which portions of the
image are still and which portions are in motion then applies different processing to
each scenario.
Figure 110. De-Interlace Settings
Note: Telecine and inverse telecine only apply to NTSC video. They are not used for
PAL and SECAM video. The system disables
Auto
and
Inverse Telecine
choices when you select either PAL or SECAM as the video standard.
11.
Click
Save Settings
.
Summary of Contents for Niagara Pro II
