6
2. Control Functions
The monitor digital control functions are located on the front panel. They are
shown in the figure below and described in the following paragraphs.
1. Power switch with indicator LED
2. Function keys
Function Selection
1. Press the 1 knob to show the OSD menu. Then use the
and
knobs to select a function. Press the 2 knob to close the OSD menu.
2. With the
and
knobs, you can adjust the speaker volume on the
monitor.
When you press the
knob, the speakers are mute. Press the
knob one more time, the speakers are active.
When you press the
knob, the speaker volume OSD is shown.
You can increase or decrease the volume by pressing the
and
knobs.
3. You can hold the 2 knob for more than 3 second to adjust the image
quality automatically.
The OSD menu will close automatically after 3-10 seconds without operation
and saves any changes you have made.
Function Adjustments
1. Signal Select
VGA
- Select the image signal coming from the VGA cable.
DVI - Select the image signal coming from the DVI cable.
(optional)
Exit
- Close the Signal Select OSD menu.
