9
3. Installation
Unpacking
Open the shipping carton and check the package contents.
If any items are missing or damaged, contact us immediately.
The package should include the following items:
-
15
TFT-LCD monitor
-DVI cable (optional)
-Power cord
-User's manual
-AC/DC power adapter
-VGA cable
-Audio cable
Installing the Base
Follow these steps to install the base:
1. Turn the monitor down.
2. Assembly the base to the arm with screw.
3. Tighten the screw with a coin.
Installing the Monitor
This monitor is equipped with an auto sensing DC power adapter for voltage
ranges of 100-240VAC, 60/50Hz. Follow these steps to install the monitor:
1. Before you connect the cables, made sure that the monitor and the system
unit power switches are off.
2.
Plug one end of the 15 pin-signal cable or DVI cable to the monitor and the
other end to the video signal connector at the rear of the system. Tighten the
two screws on the cable connector.
