43
9.3 No TV Sound
This problem may be caused by the following reasons:
1
The TV set is in mute mode or the volume of the player is adjusted to the minimum.
2
Two-channel audio is not availabl
e under the current display settings. Please press the “Track Selection” key to
select a track of two channels.
3
YPbPr is only a video connection if you use it to connect with a TV set. Please connect audio output to the TV set.
4
Amplifier is selected for the decoding setting in the system setup. Then this player will give no sound.
9.4 No Sound from Coaxial or Optical Fiber
This problem may be caused by the following reasons:
1
The sound of the amplifier is too low or the input setting is wrong. (An amplifier usually has several ports. Please use
the proper input mode for the right port.)
2
Please check the properness of your coaxial or optical fiber connection or the soundness of the cable if you use
coaxial or optical fiber to connect the player and a sound system.
3
Please check the audio settings for the compatibility between the settings and the output cable (e.g. please check
whether the setting is for straight-through amplifier if you use a coaxial cable).
Summary of Contents for HD Media Player
