25
DisplayPort Ver.:
Choose Display Port Version 1.1a or 1.2.
Cooling Fan
Select {
On
} to turn on the cooling fan all the
time. Select {
Auto
} to turn on/off the cooling fan
according to the display’s temperature.
NOTES:
•
The default {
Auto
} option will start running
the cooling fan if the temperature of 60°C
(140°F) is reached.
•
A temperature-warning message will be
shown on the screen if the temperature
reaches 70°C (158°F).
•
After the temperature reaches 70°C (158°F),
for three successive mininutes and a
temperature-waning message shown on the
screen for 10 seconds, the display power
will be shut down automatically while Power
LED will be blinking red & green.
Network control port
Choose the RS232 control form Card OPS or
embedded RS232 in PD set.
Factory settings
Reset all your customized settings to the factory
defaults.
5.2. Network Settings
1. Press [ ]
MENU
button, choose
Network
Settings
and press [
OK
] button.
Picture
Sound
Tiling
General settings
Network settings
View network settings
Network configuration
Static IP configuration
Digital Media Render...
Network name
View network settings
View connected network status.
Network Confguration
{
Network configuration
}: Choose how this
display should assign addresses to the network
resources.
The user can choose {
DHCP & Auto IP
}
(suggested) or {
Static IP
}.
Static IP Confguration
Define {
IP address
}, {
Netmask
}, {
Gateway
},
{
DNS1
}, and {
DNS2
} for this display. If {
Network
settings
} {
Static IP
} is chosen.
Digital Media Renderer - DMR
Receive multimedia files from the connected
device by your network.
Network name
In the multiple-display connection, you can rename
each display for easy identification.
Use the on-screen keyboard or the remote control
keypad to enter the name.
Summary of Contents for CDX5552
Page 62: ...52 ...
